A grease trap is designed to catch fats, oils and grease before they enter the main drainage system, but installing one is only part of the job. As grease and food waste accumulate inside, the trap needs regular cleaning to continue working effectively. Leave it too long, and the very equipment intended to protect your drains can become a source of blockages and unpleasant smells.
At BN Drainage, we install, clean, maintain and repair grease traps for commercial kitchens across Bromley and the surrounding areas. Drawing on our experience with these systems, we’ll explain how a grease trap works, what happens to the waste it collects and why proper maintenance matters for keeping kitchen drains clear.
Need help with your grease trap or drains?
If you manage a food business in Bromley, Beckenham or nearby, we can help you assess a grease trap problem or plan routine servicing. Call 0800 999 1769 or email info@bndrainageltd.com to discuss what your kitchen needs.
How do grease traps work in a commercial kitchen?
A grease trap sits between kitchen equipment and the wider drainage system. Our grease trap services cover installation, cleaning, maintenance and repairs, including dosing units.
Inside a typical passive trap, separation happens in three stages:
- Wastewater enters a chamber, where its flow slows down.
- Lighter fats and oils rise towards the surface, while heavier food particles settle at the bottom.
- Internal barriers, called baffles, help retain the grease while water flows towards the outlet.
The trapped material stays inside until it is removed. A grease trap is a collection point, not a way to make waste fat disappear.
How grease build-up in drains causes blockages
Grease can cool, stick to pipe walls and catch other debris. Over time, the opening narrows and wastewater struggles to pass. Slow drainage or unpleasant smells may signal a problem.
A trap reduces this risk, but cannot protect drains if it is overloaded, bypassed or poorly maintained. If water backs up, our blocked drain services can help identify the cause rather than assuming the trap is responsible.
The grease you catch in the trap is grease that cannot collect further along the drain, provided the trap is maintained.
Grease trap maintenance: when should you arrange a service?
There is no single suitable cleaning interval for every kitchen. A café preparing sandwiches may place a different load on its trap from a takeaway frying food throughout the day.
As grease and solids collect, they take up space needed for separation. That is why grease trap maintenance should reflect what is accumulating inside, not just the date on the calendar. We offer a quarterly maintenance option, although some kitchens may need more frequent attention.
Record inspection and emptying dates.
What happens during grease trap cleaning?
Proper grease trap cleaning involves more than lifting off the visible layer of fat. A competent person needs to remove retained grease and solids, inspect the unit and follow the manufacturer’s guidance. Waste must be disposed of appropriately, not washed back into a drain.
Some traps have food-debris baskets that staff must empty regularly. A clear-looking outlet does not reveal everything inside the chamber.
Everyday habits that help prevent grease blockages
Even a maintained trap works better when less fat enters it. Small changes at the sink help:
- Scrape food scraps into the appropriate waste container before washing dishes.
- Wipe oily pans and plates with kitchen roll first.
- Keep used cooking oil separate for collection by a registered waste carrier.
- Show staff which sinks feed the trap and what must not go down them.
Do not rely on hot water or washing-up liquid to dispose of cooking fat. Neither replaces proper waste handling or cleaning.
Choosing the right approach for commercial kitchen drainage
The best arrangement depends on your kitchen, available space and volume of greasy wastewater. A compact passive trap may suit one discharge point; a larger operation may need a differently sized separator or grease removal unit.
What about fats, oils and grease entering drains?
UK building guidance says commercial hot-food premises should have suitable grease separation or another effective removal method. It does not mean every business needs the same equipment.
Keeping your grease trap and drains working properly
A grease trap holds back much of the fat and solids that would otherwise travel through kitchen drains. Suitable equipment, sensible kitchen habits and cleaning before the chamber becomes overloaded make the protection worthwhile.
Our local engineers can help with installation, servicing and drainage problems. Find out more about why businesses choose BN Drainage.
Frequently asked questions
Can a grease trap stop every blockage?
No. It reduces grease entering drains, but food waste, damaged pipes and other obstructions can still cause problems.
How often should a grease trap be emptied?
It depends on its size, use and how quickly waste collects. Follow the manufacturer’s guidance and review the interval after inspections.
Why does my grease trap smell?
Trapped food and grease can cause unpleasant odours, particularly when cleaning is overdue. Persistent smells deserve an inspection.
Do all UK restaurants need a grease trap?
Not necessarily the same type of trap. Commercial hot-food drainage should have suitable grease removal, depending on the premises and requirements.
Can I pour hot oil down the sink if I have a trap?
No. Used cooking oil must be collected and disposed of appropriately, not poured into drains.
Talk to BN Drainage about your grease trap
Whether you need cleaning, maintenance or help with a recurring blockage, call us on 0800 999 1769 or email info@bndrainageltd.com. We can discuss a sensible next step for your premises.

